ASTM2004版塑料相关的标准
部分目录：
D0256-05 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D0494-04 Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
D0542-00 Test Method for Index of Refraction of Transparent Organic Plastics
D0543-95R01 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D0570-98 Test Method for Water Absorption of Plastics
D0618-00 Practice for Conditioning Plastics for Testing
D0635-03 Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D0638-03 Test Method for Tensile Properties of Plastics
D0648-04 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D0671 Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force
D0695-02A Test Method for Compressive Properties of Rigid Plastics
D0696-03 Test Method for Coefficient of Linear Thermal Expansion of Plastics Between \-30|SDC and 30|SDC with a Vitreous Silica Dilatometer
D0704-99R04 Specification for Melamine-Formaldehyde Molding Compounds
D0705-99R04 Specification for Urea-Formaldehyde Molding Compounds
D0706-98 Specification for Cellulose Acetate Molding and Extrusion Compounds
D0707-98 Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
D0731-95R99 Test Method for Molding Index of Thermosetting Molding Powder
D0732-02 Test Method for Shear Strength of Plastics by Punch Tool
D0746-04 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D0747-02 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D0785-03 Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D0787-96R03 Specification for Ethyl Cellulose Molding and Extrusion Compounds
D0788-04 Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D0789-04 Test Method for Determination of Relative Viscosity of Polyamide (PA)
D0790-03 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D0792-00 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D0882-02 Test Method for Tensile Properties of Thin Plastic Sheeting
D0883-00 Terminology Relating to Plastics
D0952-02 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
D0953-02 Test Method for Bearing Strength of Plastics
D0955-00 Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
D0957-95R00E01 Practice for Determining Surface Temperature of Molds for Plastics
D1003-00 Test Method for Haze and Luminous Transmittance of Transparent Plastics
D1004-03 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
D1042-01A Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D1043-02 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
D1044-99 Test Method for Resistance of Transparent Plastics to Surface Abrasion
D1045-95R01 Test Methods for Sampling and Testing Plasticizers Used in Plastics
D1055-04 Specifications for Flexible Cellular Materials\MLatex Foam
D1056-00 Specification for Flexible Cellular Materials\MSponge or Expanded Rubber
D1201-99R04 Specification for Thermosetting Polyester Molding Compounds
D1203-94R03 Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
D1204-02 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1238-04C Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
D1239-98 Test Method for Resistance of Plastic Films to Extraction by Chemicals
D1242 Test Methods for Resistance of Plastic Materials to Abrasion
D1243-95R00E01 Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
D1248-05 Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
D1249-92R99 Specification for Octyl Ortho-Phthalate Ester Plasticizers
D1430-03 Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
D1435-05 Practice for Outdoor Weathering of Plastics
D1499-99 Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
D1505-03 Test Method for Density of Plastics by the Density-Gradient Technique
D1525-00 Test Method for Vicat Softening Temperature of Plastics
D1562-98 Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
D1593-99 Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
D1600-99 Terminology for Abbreviated Terms Relating to Plastics
D1601-99R04 Test Method for Dilute Solution Viscosity of Ethylene Polymers
D1603-01 Test Method for Carbon Black In Olefin Plastics
D1621-04A Test Method for Compressive Properties Of Rigid Cellular Plastics
D1622-03 Test Method for Apparent Density of Rigid Cellular Plastics
D1623-03 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
D1636-99R04E01 Specification for Allyl Molding Compounds
D1667-97 Specification for Flexible Cellular Materials\MVinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
D1693-01 Test Method for Environmental Stress-Cracking of Ethylene Plastics
D1708-02A Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
D1709-04 Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
D1710-02 Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy Walled Tubing
D1712-03 Practice for Resistance of Plastics to Sulfide Staining
D1746-03 Test Method for Transparency of Plastic Sheeting
D1755-92R01 Specification for Poly(Vinyl Chloride) Resins
D1763-00 Specification for Epoxy Resins
D1784-03 Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1786-01 Specification for Toluene Diisocyanate
D1790-02 Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1822-99 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
D1823-95R01 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824-95R02 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1894-01 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
D1895-96R03 Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
D1896-99R04 Practice for Transfer Molding Test Specimens of Thermosetting Compounds
D1921-01 Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
D1922-03A Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
D1929-96R01E01 Test Method for Determining Ignition Temperature of Plastics
D1938-02 Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
D1972-97R01 Practice for Generic Marking of Plastic Products
D1996-97R03 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
D1998-04 Specification for Polyethylene Upright Storage Tanks
D2103-03 Specification for Polyethylene Film and Sheeting
D2115-04 Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
D2116-02 Specification for FEP-Fluorocarbon Molding and Extrusion Materials
D2124-99R04 Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
D2126-04 Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D2151 Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients
D2222-94R04 Test Method for Methanol Extract of Vinyl Chloride Resins
D2238-92R04 Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
D2287-96R01 Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D2288-97R01 Test Method for Weight Loss of Plasticizers on Heating
D2291-03 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
D2343-03 Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
D2383-97R01 Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
D2396-94R04 Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
D2457-03 Test Method for Specular Gloss of Plastic Films and Solid Plastics
D2463-95R01 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
D2471-99 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
D2538-02 Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
D2561-95R01 Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
D2562-94R02E01 Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
D2563-94R02E01 Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
D2565-99 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
D2578-04A Test Method for Wetting Tension of Polyethylene and Polypropylene Films
D2581-02 Classification System for Polybutylene (PB) Plastics Molding and Extrusion Materials
D2582-03 Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D2583-95R01E01 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2584-02 Test Method for Ignition Loss of Cured Reinforced Resins
D2647-05 Specification for Crosslinkable Ethylene Plastics
D2659-95R01 Test Method for Column Crush Properties of Blown Thermoplastic Containers
D2673-04 Specification for Oriented Polypropylene Film
D2684-95R01 Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
D2732-03 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
D2734-94R03 Test Methods for Void Content of Reinforced Plastics
D2741-95R01 Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
D2765-01 Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D2838-02 Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
D2839-02 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
D2842-01 Test Method for Water Absorption of Rigid Cellular Plastics
D2843-99R04E01 Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2856-94R98 Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer
D2857-95R01 Practice for Dilute Solution Viscosity of Polymers
D2863-00 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D2873 Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry
D2911-94R01 Specification for Dimensions and Tolerances for Plastic Bottles
D2923-01 Test Method for Rigidity of Polyolefin Film and Sheeting
D2951-00 Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
D2990-01 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
D3012-04 Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
D3013-99R04E01 Specification for Epoxy Molding Compounds
D3014-04A Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D3016-97R03 Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
D3030-95R00 Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
D3045-92R03 Practice for Heat Aging of Plastics Without Load
D3123-98R04 Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
D3124-98R03 Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
D3159-04 Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
共享方式：
yangzq2010@56.com
PASSWORD:450108
以ASTM开头的八个文件都是，下载完成后解压即可。
请大家不要更改密码以及删除其中的文件，
请大家也不要吝啬你的评价。
大家反响好的话，期待更精彩的资源吧！
2007-6-2
文件已经转移至共享区，更方便各位了。没有56邮箱的同志，可以用我的用户名与密码直接登陆下载。
2007-6-4
今天我共享的文件被人破坏了
希望不是恶意的
我已经补充好了
请大家继续使用
2007-12-23
我最初提供的邮箱被人破坏了，
所以我很失望，也不想再修复。
部分虫子给我发信息，获得了想要的资料。
如果以后有需要的（限少量自己的确需要的资料），
请给我留言或发邮件，告诉我需要您需要的ASTM号，
我将尽力帮助各位。
最好不要在帖子后面跟贴，
我现在很少来关心自己发的帖子了
[
Last edited by mengbaiyang on 2008-3-1 at 10:43 ]
