ASTM1:1,Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use
2,Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-
Finished, General Requirements for
3,Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
4,Standard Specification for Steel Springs, Helical, Heat-Treated

余下目录如下,文件在我的共享网盘中:
1.A 21 – 94 (Reapproved 1999)
Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use
铁路用碳钢车轴的热处理和非热处理标准规范.
2. A 29/A 29M – 99
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
普通型钢、碳钢和合金钢的热锻和冷加工标准规范。
3、A 108 – 99
Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
型钢、碳钢、冷加工钢材的质量标准规范
4．A 125 – 96 (Reapproved 2001)
Standard Specification for Steel Springs, Helical, Heat-Treated
钢质弹簧、螺钉的热处理标准规范。
5．A 255 – 02
Standard Test Methods for Determining Hardenability of Steel
确定钢材的淬硬性的标准测试方法
6．A 266/A 266M – 99
Standard Specification forCarbon Steel Forgings for Pressure Vessel Components
压力容器零部件碳钢锻件的标准规范
7．A 275/A 275M – 98
Standard Test Method for Magnetic Particle Examination of Steel Forgings
钢锻件的磁粉检测方法标准规范
8．A 288 – 91 (Reapproved 1998)
Standard Specification forCarbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
涡轮发电机磁性挡圈用碳钢和合金钢锻件标准规范
9．A 289/A 289M – 97
Standard Specification forAlloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
发电机非磁性挡圈用合金钢锻件标准规范
10．A 290 – 95 (Reapproved 1999)
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
减速齿轮用碳钢和合金钢锻件标准规范

11 A 291 – 02
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
小齿轮及减速装置齿轴部件用碳钢及合金钢锻件的标准规范
12、A 295 – 98
Standard Specification for High-Carbon Anti-Friction Bearing Steel
减摩轴承用高碳钢的标准规范
13．A 304 – 02
Standard Specification forCarbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
顶端淬火可淬硬性碳钢及合金钢标准规范
14．A 311/A 311M – 95 (Reapproved 2000)
Standard Specification forCold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
15．A 321 – 90 (Reapproved 2001)
Standard Specification for Steel Bars, Carbon, Quenched and Tempered
16．A 322 – 91 (Reapproved 2001)
Standard Specification for Steel Bars, Alloy, Standard Grades
17．A 331 – 95 (Reapproved 2000)
Standard Specification forSteel Bars, Alloy, Cold-Finished

18、A 336/A 336M – 99
Standard Specification forAlloy Steel Forgings for Pressure and High-Temperature Parts
19．A 355 – 89 (Reapproved 2000)
Standard Specification for Steel Bars, Alloys, for Nitriding
20．A 370 – 02
Standard Test Methods and Definitions forMechanical Testing of Steel Products
21．A 372/A 372M – 99
Standard Specification forCarbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
22，A 388/A 388M – 01
Standard Practice forUltrasonic Examination of Heavy Steel Forgings
23．A 391/A 391M – 01
Standard Specification forGrade 80 Alloy Steel Chain
24．A 400 – 69 (Reapproved 2000)
Standard Practice forSteel Bars, Selection Guide, Composition, and Mechanical Properties
25．A 413/A 413M – 01
Standard Specification forCarbon Steel Chain
26,A 418 – 99Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
27,A 427 – 74 (Reapproved 2001)Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
28,A 434 – 90a (Reapproved 2000)Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenchedand Tempered
29,A 456/A 456M – 99Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
30,A 466/A 466M – 01Standard Specification for Weldless Chain
31,A 467/A 467M – 01Standard Specification for Machine and Coil Chain
32,A 469 – 94a (Reapproved 1999)Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
33,A 470 – 01Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
34,A 471 – 94 (Reapproved 1999)Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
35,A 472 – 98Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
36,A 485 – 00Standard Specification for High Hardenability Antifriction Bearing Steel
37,A 499 – 89 (Reapproved 1997)Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
38,A 503/A 503M – 01 (Reapproved 2001)Standard Specification for Ultrasonic Examination of Forged Crankshafts
39,A 504 – 93 (Reapproved 1999)Standard Specification for Wrought Carbon Steel Wheels
40,A 508/A 508M – 95 (Reapproved 1999)Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
41,A 521 – 96 (Reapproved 2001)Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
42,A 531/A 531M – 91 (Reapproved 2001)Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

休息一下51继续,

43,A 534 – 01Standard Specification for Carburizing Steels for Anti-Friction Bearings
44,A 541/A 541M – 95 (Reapproved 1999)Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
45,A 551 – 94 (Reapproved 1999)Standard Specification for Steel Tires
46,A 561 – 71 (Reapproved 1999)Standard Practice for Macroetch Testing of Tool Steel Bars
47,A 575 – 96 (Reapproved 2002)Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
48,A 576 – 90b (Reapproved 2000)Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
49,A 579 – 01Standard Specification for Superstrength Alloy Steel Forgings
50,A 592/A 592M – 89 (Reapproved 1999)Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
51,A 597 – 87 (Reapproved 1999)Standard Specification for Cast Tool Steel
52,A 600 – 92a (Reapproved 1999)Standard Specification for Tool Steel High Speed
53,A 604 – 93 (Reapproved 1998)Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
54,A 646 – 95 (Reapproved 1999)Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
55,A 649/A 649M – 99Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

待续

好累啊.呵呵

56,A 663/A 663M – 89 (Reapproved 2000)
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
57, A 668/A 668M – 02
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
58, A 675/A 675M – 90a (Reapproved 2000)
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
59, A 681 – 94 (Reapproved 1999)
Standard Specification for Tool Steels Alloy
60, A 686 – 92 (Reapproved 1999)
Standard Specification for Tool Steel, Carbon
61, A 689 – 97
Standard Specification for Carbon and Alloy Steel Bars for Springs

62, A 696 – 90a (Reapproved 2000)
Standard Specification forSteel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
63, A 700 – 99
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
64, A 702 – 89 (Reapproved 2000)
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
65, A 711 – 92 (Reapproved 2001)
Standard Specification for Steel Forging Stock
66, A 723/A 723M – 94 (Reapproved 1999)
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
67, A 729 – 93 (Reapproved 1999)
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
68, A 730 – 93 (Reapproved 1999)
Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
69, A 739 – 90a (Reapproved 2000)
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
70, A 745/A 745M – 94 (Reapproved 1999)
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

[ Last edited by wxl_827200 on 2007-10-14 at 13:26 ]

71, A 751 – 01
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

72, A 756 – 94 (Reapproved 2001)
Standard Specification for Stainless Anti-Friction Bearing Steel
73A 765/A 765M – 01
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory ToughnessRequirements

74, A 768 – 95 (Reapproved 2001)
Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
75, A 788 – 02
Standard Specification for Steel Forgings, General Requirements
76, A 833 – 84 (Reapproved 2001)
Standard Practice for
Indentation Hardness of Metallic Materials by Comparison
Hardness Testers
79, A 837 – 91 (Reapproved 2001)
Standard Specification for
Steel Forgings, Alloy, for Carburizing Applications
80, A 859/A 859M – 95 (Reapproved 1999)
Standard Specification for
Age-Hardening Alloy Steel Forgings for Pressure Vessel
Components
81A 866 – 01
Standard Specification for
Medium Carbon Anti-Friction Bearing Steel
82A 891 – 98
Standard Specification for
Precipitation Hardening Iron Base Superalloy Forgings for
Turbine Rotor Disks and Wheels
83, A 892 – 88 (Reapproved 2001)
Standard Guide for
Defining and Rating the Microstructure of High Carbon
Bearing Steels
84, A 906/A 906M – 02
Standard Specification for
Grade 80 and Grade 100 Alloy Steel Chain Slings for
Overhead Lifting
85, A 909 – 94 (Reapproved 1999)
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

86, A 914/A 914M – 92 (Reapproved 1999)
Standard Specification for
Steel Bars Subject to Restricted End-Quench Hardenability
Requirements
87, A 920/A 920M – 02
Standard Specification for
Steel Bars, Microalloy, Hot-Wrought, Special Quality,
Mechanical Properties
88, A 921/A 921M – 93 (Reapproved 1999)
Standard Specification for
Steel Bars, Microalloy, Hot-Wrought, Special Quality, for
Subsequent Hot Forging
89, A 939 – 96 (Reapproved 2001)
Standard Test Method for
Ultrasonic Examination from Bored Surfaces of Cylindrical
Forgings
90, A 940 – 96 (Reapproved 2001)
Standard Specification for
Vacuum Treated Steel Forgings, Alloy, Differentially Heat
Treated, for Turbine Rotors
91, A 952/A 952M – 02
Standard Specification for
Forged Grade 80 and Grade 100 Steel Lifting Components
and Welded Attachment Links
92, A 956 – 02
Standard Test Method for
Leeb Hardness Testing of Steel Products
93, A 965/A 965M – 02
Standard Specification for
Steel Forgings, Austenitic, for Pressure and High
Temperature Parts
94, A 966/A 966M – 96 (Reapproved 2001)
Standard Test Method for
Magnetic Particle Examination of Steel Forgings Using
Alternating Current
95, A 973/A 973M – 01
Standard Specification for
Grade 100 Alloy Steel Chain
96, A 982 – 01
Standard Specification for
Steel Forgings, Stainless, for Compressor and Turbine
Airfoils

97,A 983/A 983M – 01
Standard Specification for
Continuous Grain Flow Forged Carbon and Alloy Steel
Crankshafts for Medium Speed Diesel Engines
98,A 986/A 986M – 01
Standard Specification for
Magnetic Particle Examination of Continuous Grain Flow
Crankshaft Forgings
99, A 1021 – 01
Standard Specification for
Martensitic Stainless Steel Forgings and Forging Stock for
High-Temperature Service1
100, D 2557 – 98
Standard Test Method for
Tensile-Shear Strength of Adhesives in the Subzero
Temperature Range from −267.8 to −55°C (−450 to −67°F)
101,D 2559 – 00
Standard Specification for
Adhesives for Structural Laminated Wood Products for Use
Under Exterior (Wet Use) Exposure Conditions
102D 2651 – 01
Standard Guide for
Preparation of Metal Surfaces for Adhesive Bonding
103, D 2674 – 72 (Reapproved 1998)
Standard Methods of
Analysis of Sulfochromate Etch Solution Used in Surface
Preparation of Aluminum
104, D 2739 – 97
Standard Test Method for
Volume Resistivity of Conductive Adhesives
105E 588 – 95
Standard Practice for
Detection of Large Inclusions in Bearing Quality Steel by
the Ultrasonic Method
106E 618 – 81 (Reapproved 2001)
Standard Test Method for
Evaluating Machining Performance of Ferrous Metals Using
an Automatic Screw/Bar Machine

终于结束,唉,累死小弟了,遗憾的是不能上传附件,太大,我将传到我的网盘急需的请发邮件给小弟,写明需要的标准编号.我给大家发邮件.wxl_827200@163.com,

[ Last edited by wxl_827200 on 2007-10-14 at 15:14 ]

附件很大,我怎么上传啊,我的网盘不支持传送大文件,哪位虫友告诉一个好方法,上传共享文件啊,谢谢.

[ Last edited by wxl_827200 on 2007-10-14 at 16:09 ]

哎,还是分割上传好了

继续,继续

接着继续

接着来~~~~~~~~

接着~~~~~~~~

继续~~~~~~~

继续~~~~~~~~

继续,~~~~~~

继续~~~~~~

啊,工程好大,继续

接着来~~~~

接着,继续,

继续啊~~~~~~~

继续~~~~~

倒数了,~~~~~

大功告成,谢谢欢迎大家捧场,哈哈,有钱的捧个钱场,没钱的顶个铁,呵呵

支持一下，留个脚印，有需要再来看

我虽然用不上这些东东，但楼主为大家的精神令人钦佩！

好人,虽然我不需要,但是帮助你顶一下,

:P:P

谢谢～～～～～

谢谢楼主:cool:

:D:D:D:D:D

虽然我用不到，还是支持一下

顶，这么好的帖子，楼主精神可佳啊。:P

B 311 – 93 (Reapproved 2002)
Test Method for
Density Determination for Powder Metallurgy (P/M) Materials
Containing Less Than Two Percent Porosity

B 611 – 85 (Reapproved 2005)

Standard Test Method for
Abrasive Wear Resistance of Cemented Carbides

B 390 – 92 (Reapproved 2006)

Standard Practice for
Evaluating Apparent Grain Size and Distribution of
Cemented Tungsten Carbides

B 276 – 05
Standard Test Method for
Apparent Porosity in Cemented Carbides

C 1161 – 02c
Standard Test Method for
Flexural Strength of Advanced Ceramics at Ambient
Temperature

[ Last edited by wxl_827200 on 2007-10-15 at 12:55 ]

续上铁~~~~~

:D:D:D:D:D:D

支持一下，可是没有星给你加

精神可嘉

:D:D:D

支持一下